Creating Venues and Fingerprinting

Creating an IndoorAtlas Account
The first step in starting to explore IndoorAtlas is to sign up free at app.indooratlas.com which is the web portal of managing your IndoorAtlas floor pl...
Mon, 7 May, 2018 at 1:25 PM
Creating a Venue (Location)
Location is the building or venue where you are going to deploy indoor positioning service.  In the IndoorAtlas system, a venue includes one or more flo...
Mon, 7 May, 2018 at 1:33 PM
Adding a Floor Plan
In the IndoorAtlas system, floor plans are used to do mapping aka “fingerprinting” or “signal data collection”.  As floor plans are aligned (geo-referen...
Mon, 7 May, 2018 at 1:37 PM
Fingerprinting Coverage
Mapping (a.k.a. fingerprinting) is the process of gathering signal data from a target venue with our mapping application, MapCreator 2.  High-quality ma...
Fri, 9 Nov, 2018 at 10:28 AM
Devices Compatible with Fingerprinting
Devices for Mapping For best possible quality, we recommend using one of the following devices: Google Pixel 1,2 and XL Nexus 5 & 5X Nexus 6P Hono...
Mon, 7 May, 2018 at 2:08 PM
Calibration for Fingerprinting
The first step in mapping is the calibration of sensors. This is done by tapping the blue button at the bottom of the screen in MapCreator.  Calibrat...
Wed, 18 Apr, 2018 at 1:46 PM
Adding Waypoints for Fingerprinting
Before starting the mapping you should plan the route you will walk to collect the data. The waypoints act as confirmation points for your data collection p...
Mon, 7 May, 2018 at 1:46 PM
Advanced Waypoint Placement
The waypoints are a crucial part of successful mapping. They tie the physical location of the mapper to the floor plan features and landmarks. The waypoi...
Mon, 7 May, 2018 at 2:46 PM
Recording Paths
In this section we show how to record high quality signal data for your maps i.e. create good quality fingerprints.  Note that to achieve great posit...
Mon, 7 May, 2018 at 2:02 PM
How to Remove Unwanted Recordings?
To enable or disable paths from floors, select the floor and choose "Mapping paths" tab. Then, disable the paths by clicking the path or ...
Fri, 9 Nov, 2018 at 9:54 AM